CrystalClear® Algae D-Solv™ is a 5.4% active EPA registered algaecide. CrystalClear® Algae D-Solv™ targets string algae, blanketweed and green water caused by single-celled algae. Unlike some algaecides on the market, CrystalClear® Algae D-Solv™ contains no copper and will not harm fish and live plants when used as directed.
EPA Registration No.: 14802-8-83742
|CrystalClear® Algae D-Solv™ Dosage Rates|
(Maximum Once a Week)
|360 Gallons||1 Ounces|
|720 Gallons||2 Ounces|
|1,080 Gallons||3 Ounces|
|1,440 Gallons||4 Ounces|
Algae D-Solv™ should only be applied a maximum of once per week at the prescribed rate to treat existing algae growth. In ponds ensure that water is well aerated via, waterfall, fountain or other method to prevent fish loss. Aeration must be continuous.
PLEASE NOTE: Not safe for use with snails, shrimp, clams and other crustaceans, or mollusks. Repeat dosage once per week for maintenance.
For Best Results
For use in self-contained aquariums, ornamental ponds and fountains without any outflow. For aquariums and small ponds with heavy algae growth, clean the excess algae off the sides and ornaments before adding Algae D-Solv™. This will reduce the amount of decaying organic matter.
Fountains, small ponds with goldfish and koi – treat only those fountains and ponds which will have no outflow after treatment. High water temperatures cause more rapid natural decay of dead algae which can cause fish distress.
Warm Weather Alert: Before using Algae D-Solv™, make certain that the pond has vigorous aeration to avoid fish loss due to low oxygen levels. When algae is controlled and removed by the filter or settles to the bottom of the pond, the oxygen level may drop to weather and high water temperatures, vigorous, 24 hour aeration is required.
Hazards to human and domestic animals – if absorbed through skin or swallowed.
Algae D-Solv™ cannot be shipped to Alaska, Connecticut, Hawaii, Puerto Rico or Canada.